What you need to know
A lead that doesn’t become a customer isn’t automatically a bad lead, and it isn’t automatically a sales failure either. Before you change anything, find out where people are dropping out.
The rate at which marketing leads turn into real sales opportunities tells you one thing. The rate at which real opportunities turn into customers tells you something quite different. Put those two numbers next to the reasons people gave for not going ahead and your lost enquiries start pointing at targeting, qualification, pricing, proposition or follow-up in a way one overall conversion figure never will.
Your conversion rate might be hiding the useful bit
Most businesses measure conversion the obvious way. Count the enquiries. Count the customers. Divide one by the other.
100 enquiries. 10 customers. 10% conversion.
That number is correct. It’s also close to useless for working out what to do next, because it treats every lost enquiry as the same kind of loss. The person who was never going to buy and the person who got a proposal and went quiet both end up in the same 90%.
Here’s why that matters. Take two businesses with identical results on paper. The figures are made up to make a point. They’re not benchmarks, and they’re not what your numbers should look like.
Business A
- 100 marketing qualified leads
- 20 became sales qualified leads
- 10 became customers
- Marketing lead to sales opportunity: 20%
- Sales opportunity to customer: 50%
- Overall: 10%
Business B
- 100 marketing qualified leads
- 60 became sales qualified leads
- 10 became customers
- Marketing lead to sales opportunity: 60%
- Sales opportunity to customer: roughly 17%
- Overall: 10%
Same overall conversion rate. Very different businesses.
Business A is losing most of its enquiries before anyone gets near a sales conversation. Four in five marketing leads turn out not to be real opportunities. But once someone is a real opportunity, half of them buy. If A goes looking for a problem in its proposals or its follow-up, it will probably find nothing much wrong.
Business B has the opposite shape. Most of its enquiries look like real opportunities. Then five in six of them don’t buy. If B spends its time worrying about lead quality, it’s looking in the wrong place.
Both businesses can see 10%. Neither can see any of this until they split the journey up.
MQL, SQL... what do they actually mean?
Marketing has a habit of dressing up simple ideas in acronyms, so let’s take these apart.
A lead is anyone who has made themselves known to you. They filled in a form, phoned, emailed, replied to a message. They’ve put their hand up and said “I’m curious, tell me more”. That’s all it means. Plenty of leads were never going to become customers, and that’s fine.
A marketing qualified lead (MQL) is a lead that looks worth a closer look. There are signs of good fit, interest or relevance to justify spending time finding out more. It’s a “probably worth a conversation” rather than a “definitely a buyer”.
A sales qualified lead (SQL) is a lead you’ve established has a real possibility of buying from you. There’s a need you can meet, a realistic budget, someone who can make the decision, and a timescale that isn’t “one day”. It’s a live opportunity.
A customer is a qualified opportunity that bought.
You don’t have to use those labels. Plenty of businesses call them enquiries, prospects and quotes, or something else entirely. The labels aren’t the point. What matters is that you can tell the difference between two groups of people:
someone who looks relevant enough to investigate further
and
someone you’ve established has a real chance of buying.
What counts as qualified depends on what you sell. For a service business like ours, it might come down to need, whether the service fits, whether the budget is realistic, who makes the decision and when they want to act. Yours will be different. The criteria have to make sense for your business, and they have to be applied consistently, otherwise the numbers in the next two sections won’t mean anything.
MQL to SQL asks whether you're attracting the right opportunities
This is the stage between “worth a look” and “real opportunity”. When relatively few marketing leads make it across, the question is roughly: are we bringing in the right people, and are we recognising them when they arrive?
That opens up a lot of places to look. Targeting. The channels you’re using. What your messaging promises. How clearly your proposition is explained before someone gets in touch. Whether people have any idea what you cost before they enquire. How you’ve defined a marketing qualified lead in the first place. And the qualification process itself.
The tempting conclusion is “marketing is sending us rubbish leads”. Sometimes it is. But hold that thought, because there are at least three other explanations that look identical from the outside.
Marketing may be attracting exactly the people it was designed to attract, but the message isn’t doing enough to help the wrong ones rule themselves out before they call.
Or you’ve defined an MQL too generously, so almost anyone counts, and the drop-off is just the definition catching up with reality.
Or good prospects are getting rejected during qualification, because the criteria are too tight, or because whoever handles enquiries is under pressure and moving on too quickly.
The number tells you where to investigate. It doesn’t identify which specific part of the process needs your attention.
SQL to customer asks a different question
Once someone is a real, qualified opportunity, lead quality stops being a full explanation. They fit. They have budget. They can decide. And they still didn’t buy. So the investigation moves to what happened during the buying process.
That covers a lot of ground. Whether the value came across. Pricing. Whether they preferred a competitor. Whether the proposition was clear enough. How quickly you responded. The quality of the sales conversations. The quote or proposal itself. Follow-up, or the lack of it. Objections nobody answered. Friction and complexity in how you ask people to buy. Whether they trusted you enough. And timing, which is sometimes nothing more than timing.
Resist the urge to jump to “our sales process is poor”. It might be. It also might not. If this rate has dropped, ask what else changed. Did you put prices up? Has a competitor arrived or got sharper? Have conditions in your customers’ market tightened? Is your qualification still too loose, so people who were never real opportunities are being counted as if they were?
One number can tell you the fall happened at this stage. It can’t tell you why. That’s a different job, and we’ll come to it.
"Too expensive" doesn't necessarily mean your price is wrong
This deserves its own section because it’s the lost-quote reason businesses hear most and act on fastest.
Someone telling you the quote was too expensive is data. It isn’t an instruction to cut your price.
“Too expensive” can mean it was outside their budget. It can mean they compared you with something that isn’t the same thing. It can mean they didn’t understand what they were getting for the money, which is a value-communication problem rather than a pricing one. It can mean they were the wrong prospect all along. It can mean something earlier in your marketing set the wrong expectation about cost. It can mean a competitor offered something that suited them better. And yes, sometimes it means your price is poorly positioned.
One comment doesn’t tell you which of those you’re looking at. Three comments don’t either, on their own.
Here’s the distinction that matters. If three poorly matched prospects say you’re too expensive, the more likely problem is targeting or expectation-setting. They shouldn’t have got as far as a quote. If well-qualified prospects, people with the need, the budget and the authority, keep telling you the same thing, that’s a different signal and it deserves a proper look. The pattern matters.
The numbers tell you where to look. People help tell you why
Everything so far has been about where. Working out why needs a different kind of information, and most businesses already have more of it than they think.
Recorded lost reasons, if you keep them. Notes against each enquiry, wherever you keep those. Quote outcomes. The email trail. What was said in sales conversations. The person who answers the phone and can tell you what enquiries feel like this month compared with three months ago. And, where it’s appropriate and won’t feel like pestering, asking lost prospects directly.
Two things make this work.
The first is honesty in how you categorise. “Didn’t proceed” isn’t a reason. If you know the budget was half what the job needed, write that down. If they went with a competitor who’s cheaper, write that down too. Vague lost reasons feel less painful in the moment and are worth nothing later.
The second is accepting that you won’t always know. Sometimes people go quiet and you never find out why. Don’t invent a reason to fill the gap. “Unknown” is an honest category, and if it starts getting large that’s a signal in itself, usually about follow-up.
The numbers tend to validate, not dictate. Useful business data includes conversations and feedback, not just what the dashboard says.
Not every lost enquiry needs fixing
Here’s the counterweight to everything above. A drop-off is not automatically a problem.
Good qualification deliberately removes people who shouldn’t become customers. Someone who can’t afford what you do. Someone who needs something you don’t offer. Someone who’d be a poor fit to work with. Someone with expectations no one could meet. Someone for whom your solution is simply the wrong one. Losing those enquiries is the process working, not failing.
It’s worth going further. Marketing that attracts everybody isn’t better marketing. It’s less efficient marketing, because it hands your team more conversations that go nowhere. The aim is to draw the right people closer and let the wrong ones recognise, early and politely, that you’re not for them. Some of your lost enquiries are the sound of that happening. Leave them be.
Start with your lost enquiries, not another marketing tactic
The next step isn’t a new campaign. It’s a review.
Pick a batch of recent enquiries that’s big enough to show a pattern for a business your size. That might be the last quarter, or the last six months, or the last thirty enquiries. Don’t react to the most recent lost quote on its own. One lost enquiry is an anecdote. A group of them can be a pattern.
For each one, answer two questions.
Where did we lose it? Before qualification, during qualification, after a conversation, after a quote?
What do we know about why? Honestly, including “we don’t know”.
Then group the answers and look for repeats. The kinds of things that tend to surface:
- lots of apparent leads, few real opportunities
- the same budget mismatch, again and again
- qualified prospects disappearing after the quote goes out
- long gaps before anyone makes first contact
- one particular objection turning up repeatedly
- one service converting very differently from another
- one lead source producing a different type of enquiry from the rest
Only then decide what deserves changing. If most of the losses sit before qualification, the conversation is about targeting, messaging and expectation-setting. If they sit after a quote to well-qualified prospects, the conversation is about proposals, follow-up and value. Those are different pieces of work, and you can’t tell which one you need from a single conversion rate.
You may find you don’t need more leads at all. Quite often the more valuable job is understanding what the leads you already generate are trying to tell you.
If you’ve done the review and the pattern still doesn’t make sense, that’s usually the point where an outside view helps. Talk to us about your marketing and how enquiries move through your business, and we’ll help you work out where to look.
Book your call with the team
Meet for a virtual coffee to explore what the right approach looks like for your business or call us directly on 0208 819 9288.